It’s difficult to do maintenance on the underside of your vehicle if it’s not appropriately lifted with enough clearance from up off of the ground. For low clearance cars especially, it’s much more difficult to find the right ramps to mount your vehicle without causing damage to the front and/or rear ends. Because we feel your frustration, we’ve done all of the research on what are the best car ramps for low profile cars so that you wouldn’t have to. We’ve also included what product features you should pay particular attention to when choosing a ramp and how to properly use them once you’ve purchased them.
Table of Contents
- 1 Top 7 Best Car Ramps For Low Cars
- 1.1 1. Race Ramps RR-40
- 1.2 2. Trailer-Aid Tandem Changing Ramp
- 1.3 3. Discount Ramps 6009-V2
- 1.4 4. Rage Powersports Car Lift
- 1.5 5. Rage Powersports Service Stands
- 1.6 6. Tomioka Racing Super Slopes
- 1.7 7. Cusco A517 SL99 Ramp Set
- 2 Before Buying the Best Car Ramps For Low Cars
- 3 How to Use Car Ramps Properly
- 4 Conclusion
Top 7 Best Car Ramps For Low Cars
|Race Ramps RR-40||Check On Amazon|
|Trailer-Aid Tandem Changing Ramp||Check On Amazon|
|Discount Ramps 6009-V2||Check On Amazon|
|Rage Powersports Car Lift||Check On Amazon|
|Rage Powersports Service Stands||Check On Amazon|
|Tomioka Racing Super Slopes||Check On Amazon|
|Cusco A517 SL99 Ramp Set||Check On Amazon|
1. Race Ramps RR-40
When you’re looking to service, maintain, or display your low profile vehicle, Race Ramps are one of the best product options in the market. The Race Ramp Company formulated their products to specifically serve owners of low profile cars because of how often the vehicles have difficulty getting up a ramp smoothly and without damage. Their product utility is renowned by car enthusiasts, racing organizations, and car clubs, as they’ve also even been featured in esteemed publications such as “Car and Driver” and “Motor Trend”.
Race Ramps are made up of a lightweight, foam-like material that proves to be portable, strong, and very easy to use. What’s important to note is that their design also prevents skid marks from being produced when they’re being used in your garage. The Race Ramp’s sleek and simple design also prevents slippage due to the sprayed hybrid polyurea that coats the outside of the ramp. The coating is claimed to be so good that the ramp can also be used on icy surfaces.
Due to their solid grip, these ramps can be placed on any flat surface, including grass, dirt, and sand, and can withstand any vehicle with tires up to the size of 8 inches. The 16.7-degree angle of approach and 40-inch length of the ramps affords all low profile cars the smooth and gradual movement it needs to be hoisted up without getting damaged in the process. Race Ramps provides your vehicle with a 7-inch clearance that you’ll need to do an oil change or general work and maintenance. They support 1,500 pounds per ramp and their maximum weight capacity is 6,000 pounds total.
Usually, the Race Ramp products withstand a long life and are highly useful because of their portability but are also liable to deform and bulge under very heavyweights. Compared to other ramps in the market, Race Ramps are pricier but are worth every dollar because of their great capabilities. With Race Ramps, you don’t have to worry about any damage or scratches that may occur to the undercarriage of your vehicle when you raise it onto the ramps.
- A 40-inch length that lifts vehicles to a clearance of 7 inches
- 16.7-degree angle of approach
- Withstands a tire width of 8 inches maximum
- 100% high density, lightweight expanded polystyrene foam
- Hybrid polyurea coating
- Accommodates 1,500 pounds per ramp, 6,000 pounds maximum
2. Trailer-Aid Tandem Changing Ramp
An unusual addition to our list, the Trailer-Aid Tandem Tire Changing Ramp is designed specifically to cater to those driving trailers. Although this is true, this product can still be used to mount your low profile vehicle. The gentle incline that is designed into these ramps allows for a scuff-free lifting experience for your low-profile vehicle.
As proven by the 4.5-inch clearance that this ramp provides, it proves to be of enough height to allow you to do work on your car. The tough polymer that the ramp is made out of proves to support a whopping weight of 15,000 pounds so if your vehicle weighs more, then these ramps are ideal for you.
Due to their material these ramps are also rust-resistant and waterproof, proving to be useful when storing or using them. With two small holes in the front, not only does this feature provide an easier way of transporting these ramps, but it also encourages any dust and debris to fall off during mounting.
Since this ramp was specifically designed for trailers, it may not be preferable to use it with your low profile car. Nonetheless, due to its gentle incline and strong material, it’s still worth mentioning that Trailer-Aid Tandem Tire Changing Ramps is a product to give a try.
- Created for tandem trailers
- 4.5 inches of clearance
- Has a maximum bearing laid of 15,000 pounds
- Made of lightweight, strong polymer
- Waterproof and rustproof
3. Discount Ramps 6009-V2
The second best ramps that are great for lifting your low profile vehicle from the ground are the Discount Ramps 6009-V2. These ramps are made of a heavy-duty plastic construction that supports the lift of your car. Another visible feature that is important to note is that there is a honeycomb design on the tops of the ramps which provides more stability and prevents the build-up of moisture.
If you’re looking to pre-lift your vehicle so that you can slide a jack or service lift underneath it, this ramp is perfect for your purposes. This ramp provides a clearance of 2.5 inches and allows up to 4,400 pounds maximum. The very low incline of 9.05 degrees prevents slippage and allows for all low profile vehicles to experience an easy and damage-free hoist up off the ground. The Discount Ramps also feature an end wall that assists in stopping the tires of your vehicle and notifying you that you’ve reached the end of the ramp.
These inexpensive ramps are perfect if you’re looking to give your low profile vehicle an extra boost above the ground. Due to their plastic makeup, they only weigh 9 pounds and make for perfect portable ramps and even fare well in seasonal storage. What the Discount Ramps lack is rubber or non-slip footings that prevent them from sliding around your garage floor. Nonetheless, if you’re looking for a ramp that isn’t as pricey and you already have the additional tools you need to raise your car, the Discount Ramps are for you.
- 9.05-degree angle of approach
- 2.5 inches of clearance
- Has a maximum bearing load of 4,400 pounds
- Honeycomb pattern which prevents moisture build-up
- End wall that assists with tire stopping
4. Rage Powersports Car Lift
Another Rage Powersports product, their 66-inch all-aluminum ramps are almost a duplicate of their service stands with the removable ramps. What is different is that these service ramps do not include the detachable ramp if you don’t need it, pricing this product as a little cheaper than their other ramp. Due to their aluminum design, you also don’t have to worry about rust plaguing your product when storing or using it.
Other features included with these ramps are the integrated wheel stops which assist in providing your car with some extra grip and stability during mounting. There are also raised side rails that serve the same purpose, providing some extra guidance when loading your car onto the ramp’s platform. On the bottom of the ramps, there are rubber strippings that help with keeping the ramps in place while you drive your car onto them.
This 66-inch long Rage Powersport ramp differs from their other option by having a steeper angle of approach, with an 11.5-degree angle of approach. The objective of this product is clearly to mount your car faster with this steeper incline while also providing a long incline that matches its steepness.
At the beginning of the ramp, it is 14 inches wide and then widens out into 16 inches at the platform. The 7 inches of clearance that this ramp provides is also ideal to conduct oil changes or other car maintenance that you may have in mind. The aluminum material that the ramp is made up of allows it to withstand up to 3,000 pounds of weight, which is ideal for smaller cars.
Although cheaper than the other ramp made by Rage Powersports, their 66-inch car lift is still relatively expensive. The welds on this ramp are said to not be the best and can pose risks of breaking if too much weight bears on top of it. As previously stated before, if you have no use for the removable ramps that Rage Powersports offers, then this product would work better for your purposes.
- 11.5-degree angle of approach
- 66-inch length that lifts the vehicle to a clearance of 7 inches
- Integrated wheel stops with raised side rails
- Has a maximum bearing load of 3,000 pounds
5. Rage Powersports Service Stands
The third best ramps for your low profile vehicle are the aluminum service stands that are manufactured by Rage Powersports. Made out of heavy-duty aluminum that’s welded together at the cross beams, you don’t have to worry about rust and the strong material is enough to support your car’s weight. Whether you’re looking to show off or work on your vehicle, these ramps are also an ideal choice for your low car.
Designed to lift your car 9.5 inches off of the ground, it allows for enough room for you to do an oil change and conduct other car maintenance. The gentle incline angle of 7.6 degrees gives you the chance to hoist your car up to a reasonable height without the chance of scratches or other damage inflicting the outside of your vehicle. Due to the aluminum material of the ramps, they’re able to support a 3,000-pound capacity. There are also removable ramps that come with it, which allows you to take them off after mounting to give yourself more room to maneuver and work with.
There are a few notable drawbacks to these Rage Powersport ramps, however. Because they’re made up of aluminum, their price point is higher than what you might be willing to pay for. Although the purpose of the ramps is to accommodate lower profile vehicles, the gentle incline causes the ramp to be longer than usual. This can pose an issue for cars with a shorter wheelbase because you may have both the front and back wheels on the ramps.
One other issue to consider is that the removable ramps don’t have a secure attachment design, meaning that there is a chance it may come loose while mounting your car. There is also a lack of buttressing or support throughout the ramps which further lowers the overall stability of the Rage Powersport product.
Although Rage Powersports had low profile vehicle owners in mind when designing this product, there are substantial drawbacks that are important to consider before purchasing it. Due to these cons, this lands the Rage Powersports ramps at number three on our list for best ramps for low profile cars.
- Made of strong aluminum
- 7.6-degree angle of approach
- 9.5 inches of clearance
- Has a maximum bearing load of 3,000 pounds
- Two stands that are 24” long and 16” wide
- Removable ramps that are 73.75” long
6. Tomioka Racing Super Slopes
Another ramp designed for pre-lifting your car before using a jack or a service lift, Tomioka’s Racing Super Slopes are perfect for doing just that. Specifically designed for owners of low profile vehicles, Tomioka wanted to produce something that would lower the chances of your car being damaged like it would when you use steeper incline ramps.
Made out of strong plastic – the same plastic that Black Widow uses – these ramps are tough enough to withstand the weight of your vehicle. The plastic allows this product to be portable due to its lightness, meaning that it’s very easy to store and bring along.
The plastic makeup of the product also provides just the right amount of sturdiness and quality you need to mount your car. Its gentle slope is perfect for lifting your vehicle until your wheels rest on the platform and hit the small end wall.
With a clearance of 3 inches, the Tomioka ramps are good for when you have the other tools needed for lifting your car higher, such as a jack or service lift. With a ramp track of 8 inches wide, these ramps are only able to withstand tire widths of 8 inches maximum. Since the price point of this ramp is lower, it may be worth giving this Tomioka product a try.
- 3 inches of clearance
- Made out of strong, heavy-duty plastic
- Strong grip track surface
- Small end wall that assists with tire stopping
- Withstands a tire width of 8 inches maximum
7. Cusco A517 SL99 Ramp Set
The Cusco Ramp Set is a blue color made up of an ABS plastic material. Due to the gentle incline that this ramp set provides, it proves to be universally useful for all low profile vehicles. What is important to note is that the amount of clearance that these ramps provide is just enough to give your car a pre-lift for the use of a floor jack or service lift.
The two-piece detachable design of the Cusco ramps requires some assembly before use but allows you to detach that second piece to make room for a proper jack placement behind your tire. Due to the lightweight material that these ramps are made up of, it makes these ramps highly portable. They even have small end walls for assisting you in knowing when your wheels have reached the platform of the ramps and to prevent your vehicle from falling off.
An issue to consider is that this ramp is entirely made up of plastic and doesn’t have any rubber or anti-slippage footings. Under a heavyweight, the product can deform and lose its structure and may slip out under the car during mounting because of the lack of a non-slip bottom. Due to the limited information provided about the Cusco Ramp Set, this lands the product in the last position of our list for the best ramps for low profile vehicles.
- Detachable two-piece design
- Made of plastic, ABS material
Before Buying the Best Car Ramps For Low Cars
When choosing the perfect ramp for lifting your low profile vehicle, all of our first concerns are whether it will be easy to mount and if your car will be damaged in the process. It’s also important to buy the right type of ramp to minimize the chances of your car accidentally falling or slipping off of it.
We all have different reasons for purchasing and using ramps and each product is distinctly different from the other. How do you know which kind of ramp suits your needs the best? Here is a list of ramp product characteristics you should consider before you purchase.
When driving your car onto a ramp, the product must have enough grip to guide your vehicle up onto the platform without any slippage occurring. Some ramps use grids or grooves on the surface of the ramp to encourage water, dirt, snow, and other debris to fall off while also providing your vehicle with some support.
Especially for lower profile vehicles, whether how gentle or steep an incline is can make or break your decision to buy that kind of ramp. For vehicles such as sports cars, there should be a lower angle of incline so that the front or back bumpers don’t get damaged while mounting and unmounting.
Also called end walls, tire stops are important to prevent your vehicle from rolling off of the ramps when it reaches the platform. This offers additional stability and support for your car when it’s resting on the top of the ramp while also preventing accidents and other damage.
The amount of ground clearance that a ramp provides will dictate whether it’s safe for you to work underneath the vehicle and if you’ll require a jack or a service lift to mount your car higher. What’s important to remember is that there is the possibility that parts of the car will be hot while you work, so it’s always helpful to have that extra space for maneuvering.
The ramp width should be wide enough to accommodate the size of tires that your vehicle has. If it’s too narrow then it’s more likely that your car will fall off the ramps and cause an unnecessary accident and damage. It’s also important to center your tires on the ramps when mounting your car, so the wider the ramp the more challenging it will be to center your vehicle.
The more gradual the incline, the better for your low profile vehicle. If you have a garage that has a lot of space, then a ramp with an extension may be helpful because it allows for a gentler incline. You should not choose a ramp that has an incline greater than 20 percent.
Car ramps are made up of different materials, many of them either plastic or some type of metal. If you have a heavier vehicle because it’s bigger, then aluminum or metal car ramps would be preferable. Plastic and polymer products are also strong but are lighter in weight, easier to store, and easy to bring with you on the go. Both metal and plastic car ramps are safe for us.
When purchasing a car ramp, you have to be mindful of choosing one that supports weights higher than your own vehicle’s curb weight (which is the weight without cargo or passengers). If you choose a ramp that does not support the same or more than your car’s weight, then you can damage the ramp and your car.
How to Use Car Ramps Properly
Car ramps are sturdier and easier to use than jack stands but it’s always important to know the steps needed to use ramps safely. Here are the steps to take when using your ramps to prevent causing damage to your vehicle or yourself.
- Always work on a flat surface that is smooth and not slippery or wet, if necessary use a carpet or rubber underlay to prevent the ramps from sliding.
- Position the ramps so that they barely touch the tires but still align with the center of your wheels.
- Before driving onto the ramps, make sure your steering wheel is centered.
- Carefully apply pressure to the gas so that your vehicle slowly ascends the ramps, if you have to, use the parking brake while pushing on the throttle to prevent the car from lurching forwards.
- Once your tires hit the tire stops at the end of the ramp’s platform, use the parking brake to prevent the car from rolling off of the ramp.
- Use wheel chocks and place them before each wheel to provide extra stability.
- You are ready to work on the underside of your vehicle!
Your low profile vehicle has to be treated with the best care, especially when you’re mounting them onto a ramp to perform some maintenance on it. Our top pick for the best car ramp for low profile cars is the Race Ramp RR-40. They are lightweight, provide a lot of traction, and provide just the right amount of clearance.
Although this is our recommendation, it’s important to purchase a ramp that is best suited for your kind of vehicle so that you can feel safe and comfortable while using it.